The Infinity Series 12V Bullet Pixels are engineered for professional holiday lighting installers who demand reliability, efficiency, and long run capability — season after season.
Why Infinity Beats Standard Bullet Pixels
Native 12V IC — no resistors or voltage regulators on the LED. Runs at 79°F vs. 113°F for traditional bullets. Less heat = longer life and fewer failures mid-season.
0.14W/pixel — extremely power efficient, letting you run more pixels per PSU port and reducing power injection needs.
Up to 3x longer runs without power injection — up to 475 LEDs at 12V, 525 at 16V.
IP68 waterproof — fully sealed for outdoor year-round use.
True 18AWG wire (0.75mm) with solid core xConnect pins — no flex-core shortcuts.
Epistar branded LEDs on a thicker 1.6mm white PCB that reflects sunlight and extends lifespan.
Specs
Protocol: WS2811
Input voltage: DC 12V (rated) | 9–16V working range
Power: 0.14W/pixel
Waterproof rating: IP68
Strand options: 50ct or 100ct
Connector: xConnect or Ray Wu
Wire gauge: True 18AWG (0.75mm)
PCB: 1.6mm white PCB
LED chip: Epistar
Compatible Controllers
Works with all major pixel controllers (FPP, xLights, HLS). xConnect variants plug directly into Pixel Now controllers and accessories.
Note: 24V testing was conducted for R&D purposes only. Maximum recommended input is 16V. Using above 16V voids warranty.
IMPORTANT: DO NOT HOT PLUG
Never plug in these pixels while the controller or pixel strings are powered on. Turn off power to both the controller and the pixel strings before connecting them. Make all connections with the power off, then restore power. Hot plugging could result into defective strands
